The metal hose is a kind of flexible pipeline component. The metal hose should be installed when the pipeline passes through the deformation seam to compensate the displacement of the pipeline in all directions caused by the settlement of the foundation and absorb vibration energy. Metal hoses are mainly installed at deformation joints in subway stations. Deformation joints are mainly distributed in the entrance section of the station, and the air duct is close to the damper wall. Stainless Steel Hose Fittings Company introduces the installation precautions of stainless steel metal hoses:
1. When storing and transporting the metal hose, handle it with care to prevent the metal mesh from hurting your hands;
2. Pay attention to protection when installing the metal hose on the construction site to avoid welding slag splashing the metal hose;
3. When installing the metal hose, a certain degree of freedom should be ensured to prevent the metal hose from being subjected to tensile stress. For the convenience of installation, it can be installed after adding a tie rod.
Through the above introduction, Metal Hose Assembly Manufacturers hopes that you can simply refer to the content of this article in future use.