The band saw is called such because the "blade" is really a band which is held in place by pulleys and moves around in a circular motion. It is a fantastic cutting machine which allows one to cut curves and round contours.


Something to take note of:


The band saw is not merely for wood. It may used to cut on other substances, glass and metals. The thing you should know is what kind of band (blade) to use. Since we're talking about woodworking shop tools, a regular tooth blade is the most common for cutting wood. You can find others including the skip tooth blade which is used for cutting softer woods and the hooked tooth blade for cutting harder sections of wood. The blades also come in different sizes, real thin and flexible for your own cuts that are curved and rounded, thicker wider blades for your own straight cuts.


A couple of security tips for using your woodworking shop tool-the band saw:


-Always do your care and reviews which you read in your manual that is manufactures.

-Make sure the tool is unplugged before beginning any of your care.

-Tighten the blade according to your own owner's manual.

-Makes sure the blade is in its proper path.

-When plugging the band saw in, constantly check to make sure it truly is in the "off" location.

-Never leave the band saw on unattended.

-Never reach across the blades.

- wear your eye protection!


A number of hints while using your woodworking shop tool - the band saw:


There's a blade guard that you should adjust than about 1/4 inch above the wood surface. When you first turn on the power saw, let it get to full speed before you begin your cutting. Be sure that the wood stays securely on the surface, as you start to cut. Use a push stick for extremely thin cuts which you may keep your fingers at least 3-4 inches away for the blade. There will be times while cutting curves take it simple and slow that you will put stress on the blades. If you do should back out of the cut to relieve the pressure, turn the saw off and wait until it totally stops, then back your wood out. Keep your working area clean and well lit, consistently remain concentrated and your thoughts at work available. Don't let others distract you.