Product Description:
400 MHz MIPS Processor
Enigma 2, Linux Operating System
colored OLED - Display
MPEG-2 / H.264 Hardware decoding
Tuner Module, Plug&Play
2 x Smartcard-Reader (Dreamcrypt CA)
Mini USB for Service and software update
10/100Mbit Ethernet Interface
1 x Scart (RGB, FBAS or S-Video)
HDMI
3 x USB 2.0 (e.g keyboard)
analog modem
S/PDIF Interface for digital bit stream out (AC-3)
DVB-S(S2)/C/T2 Triple Tuner.etc 3 tuners ,Flash 1Gb,Ram 512MB,REV. E,Configurato M
SATA
- for internal HDD 2,5 inch
unlimited channel lists for TV/Radio
channel-change time < 1 second
automatic service scan
directly bouquet-lists
EPG (electronic program guide)
multiple LNB-Switching control (supports DiSEqC)
OSD in many languages and skin-support
Videotext Decoder
extern 12V power supply
Technical Data:
DBS-Tuner mit DVB-S2:
Frequency Range 950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 �C 31 Mbaud/s (8PSK) , 10 �C30 Mbaud/s (QPSK)

Video decoder:

Video Compression MPEG-2 and MPEG-1 compatible, H.264
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:

Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

Ausgang Video:

Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:

Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:

Output: FBAS, RGB, S-Video
Mini USB service connector:
Function: Update of Firmware

Ethernet:

10/100 MBit compatible interface
Function: Update of Firmware
Analoge modem:
analoge modem for Internet connection
SATA Interface:
for internal 2,5" HDD
USB:

3 x USB 2.0
LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position:

DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:

< 15W at 12V
External PSU
Input: 110-240V AC / 50-60Hz / 0,6A

eneral
Product Type
Satellite TV receiver / HDD recorder (HDD required)
Width : 22.5 cm
Depth : 14.5 cm
Height : 5.2 cm
Weight : 0.94 kg
Enclosure Colour : Black

System
Features
Upgradable firmware, digital radio access

Audio System
Output Mode
Stereo
Digital Audio Format
Dolby Digital output

Digital Player (Recorder)
Internal Storage
Hard disc drive - 0 GB

TV Tuner
Type
Satellite tuner
TV Reception
DVB-S2
Frequency Range
950 - 2150 MHz

Built-in Display
Type
OLED

Slot(s)
Type
2 x Smart Card

Connections
Connector Type
SCART ( 21 PIN SCART ) - rear
SPDIF output ( TOS Link ) - rear
Phone line - rear
Ethernet ( RJ-45 ) - rear
HDMI output ( 19 pin HDMI Type A ) - rear
eSATA
2 x USB 2.0 ( 4 PIN USB Type A )

Miscellaneous
Included Accessories
Remote control, SCART adapter, HDMI cable, power adapter
Software : Linux

Power
Voltage Required
AC 120/230 V ( 50/60 Hz )
Power Consumption Operational
15 Watt

Main features are a 400 MHz processor, the Dvb-s2 800 HD se supports the Linux TV API

Have a look to HighDefinition TV on your Dvb-s2

10/100MBit compatible Ethernet Interface
HI connector
eSATA



Quality

1. Copy from the original,keep the high quality and improve it such as adding the fan

2. High quality materials. Sim2.2 cardinside.

3. Newest IMAGE installed and supplying the newest to you even you have bought it for a long time.

4. Strict Quality Control (QC) before the goods is sent to you

Accessories


Manual book
HDD connect cable
AV cable
DVI to HDMI cable
Remote control
Power supply

Delivery

We can send to you within 3 days after payment confirmed if your quantity is not large as we have enough stock

Packing

We will pack very safe and protect the 800hd from any damage in the delivery. Very good packing Box is used.

Agreement

Before you place the order to us, please be so kind to read the following clauses carefully. You are regarded as agreed on the following clauses if you have paid for the order:

1. Languages: If the buyer don't confirm the language while making the order, English is the default.

2. Shipping DHL/aramax: some addresses are regarded as remote areas by DHL. if we check and find it's remote area, we will not send the goods if the buyer don't pay the remote area ship fee.

3. Customs risk: As some countries forbid importing the DM, the customs of buyer`s country may seize the product. We are not responsible for any problems caused by the customs of buyer`s country. If the buyer cannot get the 800 HD for the buyer`s customs reason the buyer cannot ask the money back.

4. Customs tax: If the buyer don`t have a special requirements, We will declare goods as "Sample" or "gift" , USD28.00 to USD45.00 on the shipping invoice to try our best to help the buyer to cut down customs tax. But the customs tax should be paid by the buyer. If the buyer`s customs need the buyer to pay the high tax according to original cost, we will not be responsible for that.

5. .Customs clearance: If the buyer does not make the customs clearance for the customs tax or other reason, the buyer should be responsible for all charge and loss because of this.

6 Contact information: Please be sure to write the correct contact information when you are ordering, especially the Tel No. as the TNT/UPS/DHL maybe need to contact you to make the customs clearance or before delivering to your address they need to confirm with you.If this happen we will try to contact the buyer but if the customs clearance cannot be made in time or the package cannot be delivered for that reason, the buyer need to be responsible for this. If the package has to be returned to China for the buyer does not make the customs in time, the buyer should be responsible for all charge and loss, inlcuding of the shipping cost of returning back to china and the cost we send to the buyer.

7.Color and logo: For the customs reason, we will not send the black 800hd to Germany, we will send the neutral and silver 800hd without logo only. Hope the buyer can understand. And for some other country if we think the customs is very strict we will hide the logo for you without notice then.

silver 800hd is not 800HD name it's name is xobmaerd 800 dvb800 HD for easy import actually it is the same as dvb-s2 800hd inside


Clear all above will be mush helpful to the business between you and us. We will be able to supply the best service base on that. Thanks.


Powerful receiver for digital TV and Radio programs.

Main features are a 400 MHz processor
the 800hd se 800 SE+ (plus) supports the Linux TV API

have a look to HighDefinition TV on your 800hd se

10/100MBit compatible Ethernet Interface
DVI connector

plug & play Tuner
brilliant OLED display

SATA for use either as internal HDD 2,5" or eSATA

- 400 MHz MIPS Processor
- Linux Operating System
- OLED - Display
- MPEG-2 / H.264 Hardware decoding
- Tuner: DVB-S, optional: DVB-C, DVB-T
- Tuner Module, Plug&Play
- 1 x Smartcard-Reader
- V.24/RS232 Interface
- 10/100Mbit Ethernet Interface
- 1 x Scart (RGB, FBAS or S-Video)
- HDMI
- 2 x USB 2.0
- analog modem
- S/PDIF Interface for digital bit stream out (AC-3)
- 1GB Flash, 512 MByte RAM
- SATA
- for use either as internal SATA HDD 2,5?
- or to use for extern eSATA

- unlimited channel lists for TV/Radio
- channel-change time < 1 second
- automatic service scan
- directly bouquet-lists
- EPG (electronic program guide)
- multiple LNB-Switching control (supports DiSEqC)
- OSD in many languages and skin-support
- Videotext Decoder
- extern 12V power supply

800hd se 800 SE technical data

DBS-Tuner mit DVB-S2:

Frequency Range 950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 ? 31 Mbaud/s (8PSK) , 10 30 Mbaud/s (QPSK)

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

Analoge modem:
analoge modem for Internet connection

SATA Interface:
- for use either as internal HDD 2,5? or eSATAor internal 2,5" HDD

USB
2 x USB 2.0 Host

LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Power consumption:
< 15W at 12V

External PSU
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 3,0A

Physical specification:
Ambient Temperature +15��C...+35��C
Humidity < 80%
Size (W x D x H): 195 mm x 140 mm x 40 mm

Package included:


Sunray 800hd se V2 satellite receiver x1
remote control x1
power supply x1
HDMI cable x1
scart to av connector x1
source from http://www.sunraystore.com