You've made the best choice for installing Indoor Decorative Ceiling in your home! These multifunctional panels can be used in many areas, shower enclosures, complete bathrooms, kitchens, the list goes on. Below is a small guide that may come in handy when installing beautiful bathroom panels.

tool:
Every DIY boy or girl needs the right tools. Make sure you have the following tools before proceeding with the installation.

Pencils - Arguably the most important component in anyone's DIY toolbox. Mark the area that needs to be cut and the area that needs to be installed.
Fine Tooth Handsaw - Cuts your panel to fit its designated area. Others are known to use Stanley knives, but we recommend a fine-toothed hand saw.
ruler
tape measure
Solvent Free Adhesive
Countersunk head screws
drill
glue gun
Multitool
Install your interior corner or starter trim:
(Skip this section if your wall panels are not suitable for decorating)

Step 1: Begin by measuring the walls from floor to ceiling.

Step 2: Next trim the inside corners, then use the tape measure to mark and transfer the measurements.

Step 3: Use the multi-tool to cut the line you measured.

Step 4: Take your power drill and 12mm corpus callosum screws and drill them into the edge of the trim, we recommend you do this at 300mm intervals along the length of the trim.

The right wall panel for you:
Step 5: Measure from floor to ceiling, then use a pencil to transfer the measurement to the panel.

Step 6: Once this is done, use a straightedge and mark the width of the line where you intend to cut the panel.

Step 7: Carefully cut the panels with a fine-toothed hand saw.

Step 8: Next, use a Stanley blade to trim the narrow side of the first panel to fit the wall perfectly.

Step 9: Apply the silicone to the back of the panel from side to side in an a's way. Alternatively, if you find the walls are uneven, apply the adhesive in small spots on either side of the length of the panel.

Step 10: Attach the panel to the wall and make sure to push it into the interior or initial trim.

Step 11: Now use your drill bit to attach the countersunk screws to the tongue of the panel.

Complete your wall.
Step 12: Measure the area at the end of the wall you left, minus 5mm to account for your trim, we recommend you measure the top middle and bottom of the remaining area to ensure an even measurement

Step 13: Use a pencil to transfer this measurement to your panel.

Step 14: Then use a ruler to mark where you want to cut.

Step 15: Cut to Length Using Stanley Blades. Make sure the Stanley blade is fully cut.

Step 16: Now apply the silicone to the back of the panel and add the panel to the corner.

Install inside corners or end caps to complete the wall.
Step 17: Once your panels are in place, measure the length of the 5mm area you left at the end of the wall for your trim.

Step 18: Transfer this measurement to your interior or end trim.

Step 19: Cut the interior trim or end caps to measure and attach with screws as in the procedure in Step 3.

If you are interested in any of our products and need PVC Interior Wall Panels, please feel free to contact us,We will be happy to establish business relationship with customers from all over the world.