The requirements for poles of solar street lights are the primary utilization value. Therefore, there are also requirements for the pole processing of poles produced by solar street lamp manufacturers. The pole material of the solar street light is steel, the raw material is the international standard low silicon, low carbon and high strength q235, the wall thickness is 5mm, and the bottom flange thickness is 16mm.

The pole structure and foundation structure are calculated according to the appearance shape determined by the customer and the manufacturer's structural parameters according to the seismic level 6 and the wind resistance level 8. After the solar monitoring pole is upright, use theodolite to check the two-way straightness of the pole, and the straightness error is 1.0.

The upright rod of the rod has a tapered structure, and the whole octagonal tapered rod has no distortion or distortion. The rod roundness specification is 1.0mm. The surface of the rod body is lubricated and there is no transverse weld. Blade scratch test (25mm square) The spray layer has strong adhesion and is not easy to fall off.

Seal the pole and wrap the top with waterproof gas to enter, and the waterproof internal leakage method is reliable. The shape and size of the light pole meet the needs of users, the appearance is harmonious, beautiful and generous, the color is uniform, and the diameter of the steel pipe is reasonable.

All rod body welding technology has no leakage welding, flat welding seam, no welding defects, passivation treatment after galvanizing, good adhesion of spray plastic, thickness 65mm. Use excellent plastic powder.

https://www.geolide.com/product/led-high-bay-light/