We have qualified experts and technical staff to ensure that you get the best. A plug valve rotates a cone-shaped plug inside the valve body to control the flow of medium through the valve. These valves use full-flow systems that can be either fully open or completely closed. Usually, these valves are unable to control the medium. The main advantage of a plug valve is that it may be changed or cleaned without removing the valve body from the system. Top entry valves frequently plug valves. They are useful in applications where prompt and frequent operation is required. A plug valve is formed using a plug in the valve body that has a hollow passage. The alignment between the pipe and the hole is produced by the quarter-turn motion, resulting in an open condition. The valve sits across the pipe leading to a closed state when it is turned to a 90-degree angle from the open position. A plug valve is a manual valve with a quarter-turn rotating motion. Plug valves have been employed in a wide range of fluid services. Their efficacy in slurry applications is good. They serve as an on-off stop valve in bubble-tight services. They are employed in a variety of applications, including vacuum to high pressure, food processing, nonabrasive slurry, gaseous & vapor services, natural gas & oil piping systems, and vacuum.

They work well for diverting services, on-off valves, and mild throttles. Plug valves were initially intended to take the place of gate valves because, in contrast to a gate valve, they may be opened and closed against flow with a quarter-turn motion.It uses a plug-shaped disc, either cylindrical or tapered, to allow or restrict straight-through flow through the body. Plug valves provide a direct path through the ports, allowing fluid to travel through the opening plug with the least amount of turbulence. Flow may occur either in the completely open or fully closed position.

Plug Valve Types:
• Lubricated Plug valve
• Non Lubricated Plug valve
• Jacketed Plug valve
• Eccentric Plug valve
• Twin Seal Plug valve
• Lift Plug valve
• Orbit Plug valve


Available materials: Cast iron, Ductile iron, WCB, WC6, WCC, LCB, LCC, SS304, SS316, CF8, CF8M, Alloy 20
Class: 150 to 2500
Nominal Pressure: PN10 to PN450
Size: 1/2” to 24”
Ends: Flanged, Threaded, Socket weld, Buttweld


Visit here for more details: https://valvesonly.com/product-category/plug-valve/