Specialityvalve is best Triple Duty Valve Manufacturer in India. Triple Duty valves combine three different valve functions into a single housing. A balancing valve, a check valve, and a shut-off/isolation valve can all be replaced by a Triple Duty Valve. The amount of space required to install a Triple Duty Valve is greatly reduced. It is used to replace a hand-tight shutdown valve, a check valve, and a flow control valve on the pump system in flow measurement applications.
On either side of the valve seat, there are two NPT connections, two brass metering ports with gasketed coverings and non-slam silent check valves, bronze disc, stainless steel valve stem, stainless steel spring, and optional flange adapters. Triple Duty Valve is ideal for single, double, and vertical in-line pump applications and is extremely quiet.

Advantages of Triple Duty valves
• For use on single, double, and vertical in-line pumps
• Combines 3 functions: advantageous shutoff, silent check, and waft manipulate right into an single valve
• Can be modified from instantly sample to perspective sample within side the field Saves on space, set up time, and gadget cost

Industries that use Triple Duty valves
• Marine Industry
• Petroleum Industry
• Chemical industry
• Oil and Gas Industry
• Waste Water treatment plants

Available materials: Cast iron, SS304, SS316, CF8, CF8M, Ductile iron
Size: 2” to 20”
Class: 125 to 300
Nominal Pressure: PN6 to PN25

Thermodynamic Steam Trap
Specialityvalve is best Thermodynamic Steam Trap Manufacturer in India. Thermodynamic steam traps are mostly widely used steam traps for removing condensate from main lines. It is largely used due to its small size, wide pressure range, and one moving part, resistance to water hammer and resistance to corrosion. Thermodynamic steam trap works on the principle of thermodynamics. Thermodynamic steam trap is robust having simple mode of operation with only one moving disc.

Triple Eccentric Butterfly Valves
Specialityvalve is leading Triple Eccentric Butterfly Valve Manufacturer in India. The triple eccentric or offset butterfly valves are used to keep the metal seat and metal disc from scratching and galling. Because of its design, the seal only comes into contact with the seat when it is fully closed. This Valve is mostly used in oil and petroleum, chemical facilities, and shipbuilding etc. They are also used to prevent extrusion oh dirty or heavy oil.

Double Block and Bleed Plug Valve
Specialityvalve is the top Double Block and Bleed Plug Valve Manufacturer in India. Double block and bleed valves are used to block a pipe portion on both sides of the valve rather than just one. It implies we may close the ball valve to stop both the upstream and downstream sides of the pipe from operating and bleed the leftover pressure. Installation time, pipe system weight, and space are reduced by using a single double block and bleed valve system rather than three separate valves. It also minimizes the number of leak channels to the atmosphere, lessening the danger, which is why many oil and gas firms have made it mandatory for field equipment maintenance.

https://www.specialityvalve.com/product-category/triple-duty-valve/