Synchronous hydraulic jack is mainly used for the overall rise of the railway bridge, large machinery and equipment synchronization rise and fall, etc., the weight of the heavier are relatively large, the weight is relatively heavy.
Synchronous hydraulic jacks overcome a single jack from the top of the weight prone to tilt, resulting in damage to the weight and dangerous. Use a multi-top synchronous shunt valve, and the load on each top should be balanced, keeping the speed of the lift and descent synchronized. Synchronization valve on the synchronous use of the hydraulic jack is very critical, the same height and accuracy of the lift is controlled by the synchronization valve, with China too good adjustable valve can be used to solve the problem of synchronous use, in addition to Should also consider the ground due to the weight of heavy lifting may occur subsidence, it is best to synchronize the hydraulic jack under the pad plate or wood, Huatai TCRSM series of synchronous jack installed with pressure relief valve block and overflow valve block device to prevent overload Equipped with safety valve protection Synchronous jack to achieve safe operation and protection of lifting objects, the pressure of the device to synchronize the hydraulic jack hydraulic pressure is more suitable for high pressure requirements of the bridge construction beam.
Check the use of synchronous jack failure from two aspects, one is to see the hydraulic jack own fuel tank and electric pump station, which can be said to be synchronous hydraulic jack power system, the second is to see the connection of hydraulic jack cylinder and synchronous valve and electric pump The connection between the high pressure hose. http://www.yipengjack.com/