Valvesonly is the largest Industrial Valve Manufacturer in USA. Industrial Valve controls the flow of the medium that passes through it. By having an engineering-based team we can understand the technical needs of our clients in a better way. We believe in continuous improvements in our products to keep ourselves competent in the market. Our motive is to supply valves which are without defects to our customers. Our valves are specially designed to meet the needs of various industries like chemical industry, Oil and Gas industry, Petrochemical industry.

Below are some of the industrial valve we manufacture:
• Control valve
• Check Valve
• Safety Valve
• Gate Valve
• Globe Valve
• Butterfly valve
• Plug valve

Control Valve: Valvesonly is the largest Control valve manufacturer in USA with strong customer support and R&D. It is a power-operated valve that regulates the flow of mediums like steam, gas, oil, and water. In response to a signal from a control device, a control valve controls the flow to varied degrees between minimal flow and full capacity flow. A controller sends signal to the control valve, which causes it to move and modify the flow. It consists of two parts: a valve and an actuator. Their valve bodies come in a variety of forms and forms, depending on the service condition and application.

Check Valve: Check valves are used for preventing the reverse flow of gas, fluid, and air in the event of a brake failure. The liquid flow is started and stopped using these self-activating relied valves. Check valves are mostly used in the industrial and water service industries. Check valves are available on our website with a choice of different attachments. As an emerging Check valve manufacturer in USA, we focus on delivering your concerns with the best practices.

Safety Valve: Safety valve protects the system against over pressure. When the pressure exceeds the Maximum Allowable Working Pressure, overpressure occurs. When contrast to relief valves, safety valves can open very quickly since they operate at a predetermined pressure. As an emerging Safety valve manufacturer in USA, we focus on delivering your concerns with the best practices.

Gate Valve: Valvesonly is the largest Gate valve manufacturer in USA with strong customer support. Rather than regulating flow, this valve is typically used to shut off the flow in the valve. There is no obstruction in the flow stream, resulting in very low flow resistance. It ensures that there is no leakage. These valves have two positions: fully open and totally closed. The disc iscompletely removed from the flow stream when the valve is opened. When compared to other valves, this valve has a lot of advantages. Gate valves are useful in a variety of applications. Chemical, petrochemical, power generation, pulp and paper, and oil and gas refining sectors all use them.

Globe Valve: We are one of the largest Globe valve manufacturer in USA. The main function of a globe valve is to start, stop and regulate the flow of the medium that passes through it. This type of can be utilised for both isolation and throttling purposes. The disc in the valve rotates perpendicular to the seat during opening and shutting of the valve. Installation of a Globe valve is simple as the flow is directed up the seat ring against the disc's bottom. This prevents the dirt to flow through the valve.

Butterfly Valve: A disc is joined to the rod in this valve. The medium can flow through the valve because of the disc. The body, disc, stem, and seal are the main parts of a butterfly valve. Large butterfly valve comes with a gear box which connects the hand wheel to the stem through gears. It is utilised in a variety of industries, including the chemical, food processing, and pharmaceutical industries, as well as steam, fire, and water treatment plants. Being the leading Butterfly valve manufacturer in USA, we even customise the valves as per your requirement.

Plug Valve: A Plug valve has a cone shaped plug which rotates inside the valve body to control the flow of medium in the valve. These valves are used for full flow systems which are either fully open or fully closed. These valves are generally not designed for regulation of the medium. The main advantage of plug valve is that it can be repaired or cleaned without removing the valve body from the system. Usually, Plug Valves are top entry valves. They are useful in applications where frequent and quick operation is required.
As a reliable Plug valve manufacturer in USA, Valvesonly is committed to delivering durable, high-performing, advanced and powerful plug valves for our customers.

Available materials: Ductile iron, Monel, WCB,WCC, WC6, LCB, LCC, SS304,SS316, CF8, CF8M, CF3, CF3M, Aluminium Bronze, Bronze, Brass, F55, F53, F51, Inconel, Incoloy, Titanium
Class: 150 to 2500
Nominal Pressure: PN6 to PN450
Size: ½” to 80”
Ends: Flanged, Wafer, Lug, Buttweld, Socketweld, Threaded
Operations: Lever Operated, Handwheel Operated, Electric Actuated, Pneumatic Actuated.


Visit here for more details: https://valvesonly.com/