Motorized Shades Blinds Wholesaler Introduces The Switch-on Knowledge Of Electric Curtain Motors


Posted April 18, 2022 by wistarmotor

According to the control method, the electric curtain motor wiring is generally also connected with the switch, remote control, and central control three types of control methods.
 
According to the control method, the electric curtain motor wiring is generally also connected with the switch, remote control, and central control three types of control methods. The wiring of the remote control is the easiest, just put a set of power supply or a socket in the curtain box; if the switch or central control is controlled, put a set of power supply in the curtain box, and then lay two sets of 3*1RVV lines from the curtain box (strong electricity) or a network cable (weak electricity) to the switch bottom box or the central control box. The general wiring method is to leave a set of power supplies in the curtain box, and then distribute two sets of 3*1RVV lines to the switch or central control, so that no matter how it is controlled, it can be controlled. Below, Motorized Shades Blinds Wholesaler introduces how to connect the electric curtain motor?

1. If you choose to use only the remote control (such as air conditioner, TV, etc.)

If all you need is the remote then you can just put the electrician in the shade box, or put an electrical potential and socket near the surface where the shade is installed (like an air conditioner socket). But it should be noted that the electric potential requires the bottom frame to be an 86 model (non-GB plastic bottom box). Compared with others, ordinary household iron bottom boxes are slightly larger.

2. If you choose remote control and manual control panel control (such as switch panel)

If you choose to use both the remote control and the manual control panel, then ask the electrician to open a potential on the wall, and pay attention to the requirements of the bottom box used as above. In addition, lead another three-core wire (one for single track and two for double track) from the position where the bottom box is installed. It should be noted that each electric curtain track motor must be connected to a three-core wire, and the motor zero line of the two tracks cannot be shared.

Through the above introduction, Dc Solar Motor For Roller Shutter Suppliers hopes that you can simply refer to the content of this article in future use.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By wistarmotor
Country China
Categories Accounting , Affiliate Program
Tags motorized shades blinds
Last Updated April 18, 2022