Everyone can understand the stamping parts, stamping will be very popular in real life, it is recognized by people, and the range of use is also relatively wide. The manufacturing process of Metal Stamping Parts is to use metal or non-metal The sheet is then formed by pressing with the help of a press through a stamping die. During the stamping of the stamped part, the surface of the material is not damaged, so it has a good surface quality and a beautiful appearance. However, there will be errors in the production process. How to improve the stamping quality, the following editor from the stamping part processing manufacturer introduces it to everyone:

Inspection of stamped parts processing

A formed stamped part product must be strictly tested and qualified before it can be put on the market, so as to ensure that the quality and performance of the product meet the requirements. There are many methods for inspecting stamped parts. The following editors will introduce a few to let you know.

The first is the simplest touch inspection. As long as the staff touches the cleaned stamped parts with their hands, they can feel the surface quality, but this is largely dependent on the experience of the personnel, so some errors will inevitably exist. Therefore, further inspection is needed. You can use whetstone to grind stamped parts, especially some arcs or hard-to-reach parts. You can quickly check the quality of the product.

If you do not use whetstone, you can also use a flexible gauze to grind it, press it close to the surface of the stamped part and grind it to the entire surface in the longitudinal direction. In this way, any pitting and indentation on the stamped part will be easily found. If a defect is found, it must be repaired before it can be used.

In addition to ensuring the strength, stiffness and other performance properties of stamping parts, the stamping parts must also meet the requirements of the stamping process.

The quality of the material directly affects the design of the stamping process, the design of the die, the service life of the die, the quality and service life of the stamped part product, and also the cost of the stamped part. Therefore, on the one hand, the structural processability of stamped parts should be improved through product design to send the deformation conditions of the material during the stamping process to reduce the quality requirements for the material. On the one hand, materials that are suitable for stamping and forming should be selected to meet the deformation requirements of the stamping process and ensure the quality of the parts. Therefore, when selecting the materials for Stamping Parts, it is necessary to scientifically and reasonably evaluate the stamping properties of the materials, and correctly grasp the relationship between the stamping properties of the materials and the stamping formability, so as to give full play to the plastic deformation ability of the material, which not only reduces the material cost but also ensures the stability of production.