Oil filtering generally refers to the process of removing contaminant particles from oils. The types of oil that can be processed with this technique are numerous. They are important in machinery and have a lot of benefits. Nowadays filtration skids are being incorporated into the existing oil filtration systems to further enhance the effectiveness of this process.
Oil filtration has now become very popular in the engines of automobiles. Through removing contaminant particles, the engine performance and efficiency increases. It also reduces the maintenance costs by preventing the timely oil change that was required earlier. Oil filtering can also remove any carbon deposits that may occur in the engine oil. Although oil filtration prevents most of the particulate matter from entering the engine, some smaller particles still slip through and cause problems when they reach a certain level. In such a situation, oil change might be needed.
In order to check whether your engine requires an oil change or not, the contamination level in any type of oil is categorized into any of the three levels mentioned below.
• If your engine oil has only light amount of contamination then there is no need of an oil change. This is because such small levels do not affect the engine performance in any way.
• If the oil contains moderate levels of contamination then the oil does not require immediate attention, but doing an oil change is advisable.
• If the oil is heavily contaminated then it needs to be replaced as soon as possible, as it can even cause engine failure.
Filtration of oil is made possible using a variety of techniques and materials. The most common and the simple one uses basic mechanics for functioning, hence named as mechanical filters. They consist of a bulky material fitted with filters. Magnetic filters have strong and permanent electromagnets for extracting the metallic particles that may otherwise flow into the engine parts. Sedimentary filters use the force of gravity to separate the particles. These filters work when the particles are heavier than the fluid. Similarly, centrifugal filters use centrifugal force for filtration.
Oil filters are generally fitted at the bottom of an engine. But nowadays, engineers are giving this matter a lot of thought so as to position it in the most convenient position possible. It should have sufficient protection, ease of access for maintenance and still the position should not affect the performance of the vehicle. The position of the filter also has a role to play in determining the level of wear and tear that the filter will have to suffer.
Oil filtration skids are integrated into the ordinary filtering systems mentioned above so as to increase the capabilities of the engines. They offer full isolation of the oil from the contaminants, which can result in less frequent oil changes. So, filtering skids further reduce the maintenance costs of the modern motor vehicles. They always bring about excellent results. They are also widely accepted due to the small initial costs that they incur. Due to these benefits, engines are now being equipped with an efficient oil filtration and skid system for better performance.


If you are interested to know more about oil filtering ( http://www.biokem.com.au ) and filtering skids ( http://www.biokem.com.au ) , consider visiting our website. You can also acquire the services related to these from our website.